MikesArcade.com Coin-op Video Arcade Technical Information Archive
  Home  |  Repair Logs  |  Game Manuals  |  Monitor Manuals  |  Online Store  |  Links  |  Contact Us
Technical Info
  Repair Logs
  Pacman fixes
  Manuals & Schematics
  Monitor Manuals
  Nintendo Game List
  Nintendo Joysticks
  Nintendo Buttons
  Data I/O Promlink 6.10
Spies Wiretap Archives
  Coin-op Video Game List
  Game Conversions
  The Mixed Bag
  PCB Pinouts and DIPs
PDF Game Artwork
  Coin door inserts, etc.
  Instructions cards
  Operation Sheets
  Control Panel & Bezels
Jukebox
  Title Strip Creator
Tutorials
  Component markings...
  Crating a game
  Build your own cabinet
Board Upgrades
  Double Donkey Kong
Wanted
  Items I'm looking for
Miscellaneous
  Links
  Contact Us
Certifications
  Valid HTML 4.01!
 
Omega Race Pinouts

Omega Race is a 2 part boardset that consist of a MOTHER BOARD PC =
(A084-90007-E929) and a LOGIC BOARD PC (A084-91372-D929) that plugs into =
the card connector on the Mother Board.

MOTHER BOARD PINOUTS

J5 6 Position

 1- GND
 2- GND
 3- KEY
 4- 8 Volt Unregulated (this is used for the BATT Charger circuit)
 5- +5VDC
 6- +5VDC

J6 3 Position

 1- 18V AC (low)
 2- 18V AC Centertap
 3- 18V AC (high)

J7 18 Position  THIS IS THE CARD EDGE CONNECTOR

 1-=20
<no connects 1-7>
 7- KEY
 8- Y OUT
 9- X OUT
10- (To Logic Board J1 Pin 19 ~ Ground for Cocktail?)
11- Z OUT
12-
13-
14-
15- Z GND
16- X GND
17- Y GND
18-

LOGIC BOARD

J1 22 Position

 1- Coin 2 Normally Closed
 2- Player 1 Thrust
 3- Tilt
 4-
 5- Player 2 Steering Encoder Bit 2
 6- Player 2 Steering Encoder Bit 0
 7-
 8- Player 2, 1 Credit light
 9- Player 2 Steering Encoder Bit 3
10- Player 1, 2 Credit light
11- Player 2 Steering Encoder Bit 4
12- Player 2 Steering Encoder Bit 5
13-=20
14-=20
15-
16- Coin 2 Meter
17- Player 2 Steering Encoder Bit 1
18- Coin 1 Meter
19- To Mother Board J7 pin 10 (Cocktail mode only?)
20- Player 2, 2 Credit Light
21- Player 1, 1 Credit light
22- +5VDC SENSE on Power Supply Board.

J2 15 Position Connector

 1- Switch GND
 2- Player 1 Steering Encoder Bit 2
 3- Player 1 Steering Encoder Bit 3
 4- Player 1 Steering Encoder Bit 5
 5- Player 1 Steering Encoder Bit 1
 6- Player 1 Steering Encoder Bit 4
 7- Player 1 Steering Encoder Bit 0
 8- Player 1 Fire
 9- Test
10- Coin 2
11- Coin 1
12- Coin 1 Normally Closed
13- KEY
14- Player 1, 1 Credit
15- Player 2, 2 Credit

J3 15 Position

 1-=20
 2- SPKR Common to both
 3- KEY
 4- SPKR 1
 5-=20
 6-=20
 7- SPKR 2
 8-
 9- +12 VDC
10- GND
11- Player 2, Fire
12- Player 2, 2 Credit
13- Player 2, 1 Credit
14- Player 2, Thrust
15-


NOTE:  The above pinouts are from my manual.  I assume no responsibility =
for any errors & would appreciate any corrections.  The single player =
versions *should* work the same way but without the 2nd Player Steering =
Encoder & Action buttons (you will need the 2 player 1 Credit/ 2 Credit =
buttons).

Kev
mowerman@erols.com
http://www.erols.com/mowerman


 


Home  |  Online Store  |  Repair Logs  |  Manuals and Schematics  |  Monitor Manuals  |  Component Markings  |  Links

All Content Copyright © 2000-2017 by MikesArcade.com