Pinouts for Atari Video Pinball (1979):
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Typed up by 
Andy Welburn - 10th April 2000
http://www.willowsp.u-net.com/andy/arcade.htm
warlords@ukvac.org.uk


This info was obtained from a original Video Pinball 
Operations manual.

Do bear in mind that this game runs on a Black + White
monitor, so you'll have to work out some kind of hack
before you can convert it to JAMMA ;)



44-pin edge connector
----------------------------------------------------
     16.5v CT       | 1  | A  |    16.5v CT
     +10v UNREG     | 2  | B  |    +10v UNREG
     LOCKOUT COIL   | 3  | C  |    COIN COUNTER
     ANODE 6        | 4  | D  |    ANODE 7
     +5v            | 5  | E  |    CATHODE 1
     CATHODE 2      | 6  | F  |    CATHODE 3
     ANODE 5        | 7  | H  |    CATHODE 4
     ANODE 3        | 8  | J  |    ANODE 4
     ANODE 6        | 9  | K  |    ANODE 1
     VIDEO GND      | 10 | L  |    ANODE 2
     SPEAKER GND    | 11 | M  |    VIDEO 
     N/C            | 12 | N  |    SPEAKER
     PLUNGER 1      | 13 | P  |    PLUNGER 2
     N/C            | 14 | R  |    NUDGE
     TEST           | 15 | S  |    N/C
     START          | 16 | T  |    SLAM
     COIN 2         | 17 | U  |    COIN 1
     RIGHT FLIPPER 2| 18 | V  |    LEFT FLIPPER 1
     25v AC         | 19 | W  |    25v AC
     25v AC         | 20 | X  |    25v AC
     GND            | 21 | Y  |    GND
     25v CT         | 22 | Z  |    25v CT





All info supplied above is accurate to my knowledge, and i accept 
full responsibilty if your incompetance results in a blown 
board/monitor/house fuse/mind.

All enquiries about sueing me should be forwarded to the above email
address where i will invite you to kiss my big fat juicy grits.



enjoy! ;)